BIKE SERVICES

Mobile Bike Tune-up Services

Standard Bicycle Tune-up (MT, Road, Tri, Gravel, and Hybrid Bikes)

Includes the following: (1.5hr estimated work time) 

$55

PRICE

Install and Lube New Brake Cables and Housing Mechanical Internal Integrated (Labor Only)

Includes the following: (1hr estimate work time)

$50

PRICE

Install Bar Tape (LABOR ONly-Purchased from BIke.co)

Includes the following: (30 minutes estimate work time)

$10

PRICE

Install Bar Tape (LABOR Only-Purchased Elsewhere)

  • Includes the following: (30 minutes estimate work time)

$20

PRICE

Install New Stem (Headset Components)

Includes the following: (30 minutes estimate work time)

$15

PRICE

Install and/or reroute Di2 Handlebar wires purchased at (Labor Only-purchased from bike.co)

Includes the following: (1hr estimate work time)

$15

PRICE

Additional Labor for Removal and Cleaning of Corroded/Rusted Parts/Bolts/Components/etc

Includes the following: (1:15hr estimate work time)

$30

PRICE

PRE-BIKE PURCHASE SIZING FIT w/PREMIER FIT FOLLOW-UP

Includes the following: (4 hours estimate work time)

Save $550 on these 2 bike fittings w/combined session

Session 1: Using the GURU Fit Bike, this is a pre-bike purchase fitting session, in which we will do an analysis of your measurements and provide the information for buying any brand of bike thus assuring your new bike purchase will be exactly what fits YOU!  At this time we can also discuss additional/optional component choices, bars and stems, wheel upgrades, electronic shifting options, power meters, etc.

Session 2: Thorough analysis of Rider’s position throughout every portion of the pedal stroke in order to capture the full range of bio-mechanical movement.  This complete picture of both athlete and machine makes for a bike fit that is optimal for performance, efficiency, injury prevention and comfort.

 

  • Using the GURU Fit Bike for a complete analysis
  • Biomechanical analysis 
  • Cycling-specific assessment
  • Dynamic Capture of full body movements to determine optimal position
  • Includes Full Custom Installation and Adjustments of the Pedal/Shoe/Cleats
  • A COMPLETE and TOTAL FIT SOLUTION from START TO FINALIZATION…w/a DISCOUNT!!!

$399

PRICE

PREMIER TRIATHLON, ROAD, GRAVEL, or MTB BIKE FIT (Cleats to Seat)

Includes the following: (3:30 hrs estimate work time)

A thorough analysis of Rider’s position throughout every portion of the pedal stroke in order to capture the full range of biomechanical movement.  This complete picture of both athlete and machine makes for a bike fit that is optimal for performance, efficiency, injury prevention, and comfort.

Using the GURU Fit Bike for a complete analysis, this fit includes the biomechanical analysis, cycling-specific assessment, and Dynamic Capture of full body movements to determine the optimal position.  Includes installation and a “Full Analysis and Custom Adjustments” of the PSC (Pedal/Shoe/Cleat Combination to include shims if needed). 

A TOTAL FIT SOLUTION!!!

$299

PRICE

ADVANCED TRIATHLON BIKE FIT

Includes the following: (2:15 hrs estimate work time)

Using the GURU Fit Bike for analysis, this fit includes installation and “standard” adjustment of cleats and adjustment of saddle height, saddle fore/aft.   Includes working on determining a choice of saddles and pedals/cleats.  For the Tri-bike it includes aero bar adjustment/fit.  This is a perfect solution if you are having difficulty finding a comfortable riding position, a comfortable saddle, wanting to change pedals or a comfortable aero bar/cockpit.   If you are looking for the complete PSC (Pedal/Shoes/Cleat) adjustments to make the custom adjustments to fit ‘you to the bike’ at the Pedal Contact Point –  please upgrade to the “Premier Fit” to allow for this highly recommended service). 

$229

PRICE

ADVANCED ROAD GRAVEL, MTB, or Hybrid Bike FIT

Includes the following: (2 hr estimate work time)

Using the GURU Fit Bike for analysis, this fit includes installation and “standard” adjustments of cleats, adjustment of saddle height, saddle fore/aft, and handlebar adjustment.  Includes working on determining a choice of saddles and pedals/cleats.  This is a perfect solution if you are having difficulty finding a comfortable riding position, a comfortable saddle, wanting to change pedals, or drop bars.  If you are looking for the complete PSC (Pedal/Shoes/Cleat) adjustments to make the custom adjustments to fit ‘you to the bike’ at the Pedal Contact Point –  please upgrade to the “Premier Fit” to allow for this highly recommended service). 

$209

PRICE

STANDARD ROAD,TRIATHLON, Gravel, or MTB BIKE FIT

Includes the following: (1:30 hrs estimate work time)

This fit is only for bikes with standard, non integrated stems and seat post designs.  It focuses on setting up the bike to your proper protocol measurements, also known as a Static Fit.  Includes standard adjustment to saddle height, saddle for/aft, handlebar adjustments, and stem length if needed.  The fit will be conducted using using the Manual adjusting RETUL Muv Fit Bike to develop the standard bike fitting parameters/protocols and calculate the fit.

NOTE: This fit is completed using the manual adjusting RETUL Muve Fit Bike for Static/Range fit and does not include the custom PSC (pedal/shoe/cleat) adjustments – please add the PSC(Pedal/Shoe/Cleat) fit along with this fitting or upgrade to the “Premier Fit” that allows for a more custom/specific set-up and dialed in angles in this highly recommended custom fitting service.    

$149

PRICE

PRE-BIKE PURCHASE SIZING FIT ONLY

Includes the following: (1:15 hrs estimate work time)

This is a pre-bike purchase fitting session, using the Guru DFU Fit Bike, in which we will do an analysis of your measurements and provide the information for buying any brand of bike thus assuring your new bike purchase will be exactly what fits YOU!  At this time we can also discuss additional/optional component choices, bars and stems, wheel upgrades, electronic shifting options, power meters, etc.

$149

PRICE

PSC (Pedal/Shoe/Cleat Combo) FIT ONLY

Includes the following: (1:15 hrs estimate work time)

The foot pedal connection is the most important aspect of any bike fit because most cycling pain and discomfort originate from the feet.

This session is for anything foot related. If your position is OK and you have changed shoes or are looking to purchase new shoes and/or pedals, or something just doesn’t feel right this is the appointment for you. We will ensure the shoes fit properly and the cleats are set up correctly with the necessary wedges.

This should be schedule only as an add-on to a fit or at a later date (within 1 calendar of a bike fit) when allowed.  A Full Bike Fit is still recommended and a key part of a True Bike Fit while the PSC is only 1/3 of a true fit.  PSC is just 1 connection point out of 3 on a bike, however if this is all you need after having a full bike fit, then this is definitely the right choice for you. 

In the PSC we will analyze and make the following adjustments as needed:

1.  Installation of pedals and cleats

2.  Cleat For/Aft position

3.  Cleat Side to Side Position – Knee Alignment

4.  Pedal Spacers/Extenders

5.  Cleat and Foot Tilt/Angle (wedges as needed)

6.  Cleat Rotation

7.  Discuss and/or adjust leg length issues as needed

$139

PRICE

General Follow-up & Bike Check

Includes the following: (1 hour 30 min .. ish estimate work time)

The follow-up appointment is like a MINI-FIT (within 1 year of the Original Bike Fitting Session).  We already have your original data so will remeasure and make specific adjustments on your bike to address any follow-up issues/concerns your bike, or check and make sure the set-up is correct per your previous fit, as well as check you over and focus on the issues we need to cover in the session. After the session we can set up your bike with new components if needed and services required.

Recommended when the body change over time and a bike can suffer from ‘positional drift’ caused by traveling and component changes.

$149

PRICE

Spec's/Coordinate Application to a New Bike, or 2nd bike of the same type, from a previous OZ Bike Fit Session

Includes the following: (1 hour 30 min .. ish estimate work time)

We already have your original fit data, on same type of bike, therefore I will apply the same spec’s and coordinates on the new or 2nd bike as well as check and make sure the set-up is correct per your the previous fitting.

Note: A different bike may require different components, such as a stem, etc.  These will be charged in addition to the application.  Also, this application can only be applied to the same type of bike.  For example, A Road Bike Fit cannot be applied to a Triathlon Bike.

$149

PRICE

ADDITIONAL CUSTOM SERVICES
BIKE REPAIR, TUNE-UP & BUILD

For additional, custom bike services, please call or email us – ride@bike.co or (479) 323-2452 or schedule an appointment online

*Note: Pricing above is for labor only and excludes any parts, accessories or components. 

The BIKE.CO tune-up service is designed to get your bicycle back on the terrain as quickly and efficiently as possible.

And with our mobile bike repair and tune-up service, we come to you!

Regular tune-ups are an important factor for not only the safety of the rider but also prolonging the life of your bicycle and all its components! A mountain bike is a suspension system. We make sure you’re ready to take on that gnarly descent, or just cruise around town. With our tune-up service not only will you have a new rear shock installed (if needed) but also all of your components will be checked, adjusted and serviced.

Service packages are available for all types of bikes from mountain to road-style. We also offer tune-up and maintenance services for your bike every time you take it in. With our maintenance service, we test brakes, lubricate chains, and adjust gears to improve the performance of your bike.

Our specialty is in the most advanced level of servicing your bike. We use professional shop tools to check components all the way down to dust wiper seals. A complete multi-point inspection is performed on every bike before it leaves our shop. No other company in the market can touch our value or dedication to customer service and quality workmanship. We have package deals that will fit the needs of all riders, from newbies just getting into the sport to the most experienced amateurs and weekend warriors.

How Often Should You Service Your Bike?

A well maintained bike is technically “broken in” and thus ready for any possible riding situation. How often you service your bike after this point is really up to you. It depends on how long, far and fast you ride, the terrain, type of riding, and the individual condition of your bike. If you ride on a smooth groomed surface once a month it’s almost impossible to wear out your drivetrain. If you ride hard technical single track, some bush-whacking, or go mountain biking in a group then you may be shocked to find it needs servicing every week or two!

Bike maintenance is an important part of owning a bike. Even if you just ride occasionally, or for leisurely purposes, it is important to maintain your bike regularly. There are several obvious reasons to do this. If your bike breaks down, it can be very dangerous. It will also be much less pleasant of a ride if your bike is not operating correctly. If you have any questions about how often you should service your bike, the following explanations are meant to help clear up any confusion and make the process easier for you.

The most important time to service your bike is before an event. Depending on how much you ride, this should be approximately every three months. Why? During the season many things can occur with the bike: riding in a brush, riding in wet conditions, and traveling on airplanes can all cause damage that is not immediately visible.

Many riders remember to service their bike after a bad fall or a major impact. Most of us, however, don’t give it much thought–until something goes wrong. The mountain bike is presented with a unique set of demands that few other vehicles face: mud, sand, and water are just part of daily life for most riders.

We provide a one-stop bike tune-up service for all your needs. We’ll make sure you’re out enjoying the beauty of your surroundings or conquering those hills as soon as possible

The world's premier mountain bike rental service, our bikes are maintained year-round, for a safer and more enjoyable experience in some of the most beautiful places in the world. Based on Northwest Arkansas, we have the experience and easy online checkout experience you are looking for in your bike rental. If we don't have a bike in your size, we're happy to provide a size that will fit you.

Our simple online mountain bike rental service is a multi-stage experience designed for the novice, intermediate and advanced bikers. Regardless of your level, our bike rental service will enhance your biking experience.

A bike is a perfect mode of transportation in most cities. We sell both road bikes and mountain bikes. Both come with their own advantages. Road bikes have lighter frames, skinny tires, and smaller wheels for use on paved roads and trails; while mountain bikes have wider tires, sturdier frames, and suspension for bumpy terrain. Our bikes come with different features like front shocks and rear springs. They're designed by some of the most well-known manufacturers.

We also offer custom bike building. If you’re looking for a quality-built, custom bicycle with the components of your choice, we can help!

Service has been
added to your cart